IBM 자격증 000-550 시험덤프

ITExamDump 에서 제공해드리는 IBM인증000-550시험덤프자료를 구입하시면 퍼펙트한 구매후 서비스를 약속드립니다. ITExamDump에서 제공해드리는 덤프는 IT업계 유명인사들이 자신들의 노하우와 경험을 토대로 하여 실제 출제되는 시험문제를 연구하여 제작한 최고품질의 덤프자료입니다. IBM인증000-550시험은ITExamDump 표IBM인증000-550덤프자료로 시험준비를 하시면 시험패스는 아주 간단하게 할수 있습니다. 구매하기전 PDF버전 무료샘플을 다운받아 공부하세요.

IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. IBM인증 000-550시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의IBM인증 000-550덤프로 자격증을 편하게 취득하는게 어떨가요?

시험 번호/코드: 000-550

시험 이름: IBM (IBM solidDB and IBM solidDB Universal Cache)

빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로IBM 000-550인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.

우리ITExamDump 사이트에IBM 000-550관련자료의 일부 문제와 답 등 문제들을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 여러분은 이것이야 말로 알맞춤이고, 전면적인 여러분이 지금까지 갖고 싶었던 문제집이라는 것을 느끼게 됩니다.

이 글을 보시게 된다면IBM인증 000-550시험패스를 꿈꾸고 있는 분이라고 믿습니다. IBM인증 000-550시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의IBM인증 000-550덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의IBM인증 000-550덤프는 고객님께서 IBM인증 000-550시험을 패스하는 필수품입니다.

ITExamDump전문가들은IBM 000-550인증시험만을 위한 특별학습가이드를 만들었습니다.IBM 000-550인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게IBM 000-550인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

000-550 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-550.html

NO.1 What are two possible reasons for high latency between a solidDB in-memory cache and a back-end
database? (Choose two.)
A. Insufficient network bandwidth for the volume of transactions that are being processed.
B. The network connection between the solidDB in-memory cache and the back-end database is
down.
C. There is database lock contention on the target database.
D. The CDC instances are stopped.
E. Table mappings are not configured properly.
Answer: A,C

IBM   000-550자격증   000-550기출문제

NO.2 To set the transaction log retention space size for solidDB Universal Cache in the solidDB
configuration file (solid.ini), which parameter is used?
A. [LogReader]
MaxLogSize
B. [Com]
ReadBufSize
C. [Hotstandby]
MaxMemLogSize
D. [indexFile]
CacheSize
Answer: A

IBM dump   000-550자료   000-550   000-550

NO.3 To execute the HotStandby administrative commands, which type of access privilege would be
needed?
A. SYS_ADMIN_SYNC_ROLE
B. SYNC_ADMIN_ROLE
C. ADMIN_CONSOLE_ROLE
D. SYS_CONSOLE_ROLE
Answer: D

IBM   000-550자료   000-550   000-550덤프   000-550자료

NO.4 What is the correct setup topology when deploying IBM solidDB Universal Cache in conjunction
with IBM solidDB High Availability (HotStandby) functionality?
A. CDC for solidDB instances are running on both the Primary node and on the Secondary node,
each CDC instance locally connecting to one solidDB server.
B. CDC for solidDB instance is running on the back-end node, remotely connecting to both
Primary and Secondary solidDB servers.
C. CDC for solidDB instance is running on the back-end node, remotely connecting to the Primary
server. Connection to the Secondary server is managed using Advanced Replication.
D. CDC for solidDB instance is running on the Primary node, locally connecting to the Primary
server. Connection to the Secondary server is managed by transparent failover.
Answer: B

IBM   000-550최신덤프   000-550자료   000-550 pdf   000-550기출문제

NO.5 A solidDB disk-based database instance has been optimally running for six months and starts to
experience major degradation in performance. Upon executing an overall DB status report using ADMIN
COMMAND "status", it is noted that the value for index writes after last merge is at
20945876. Why would this be a probable cause of the performance degradation?
A. A large value for this counter signifies that the creation of indices, after a large batch insert
process, has been halted leading to excessive memory usage which can cause serious
performance issues.
B. A large value for this counter signifies that a large number of transactions are being
checkpointed which can cause serious performance issues.
C. A large value for this counter signifies that the multi-versioning storage tree is not being flushed
to disk due to a long running transaction which can cause serious performance issues.
D. A large value for this counter signifies that a transaction performing a merge-join is utilizing a
large amount of memory causing potential process paging/swapping leading to serious
performance issues.
Answer: C

IBM인증   000-550   000-550 dump   000-550인증

NO.6 To administer a HotStandby database you need which privilege?
A. Sys_Sync_Admin_Role
B. Sys_Console_Role
C. Sys_Hotstandby_Role
D. Sys_Replication_Role
Answer: B

IBM   000-550시험문제   000-550 dumps   000-550자격증

NO.7 Which software components must be installed to deploy IBM solidDB Universal Cache and provide
access to data residing in an IBM DB2 database?
A. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2, IBM
InfoSphere CDC Access Server, and IBM InfoSphere CDC Management Console
B. IBM solidDB, IBM DB2, IBM Universal Cache for DB2,IBM InfoSphere CDC Replication Center,
and IBM InfoSphere CDC Management Console
C. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC Access Server,
and IBM InfoSphere CDC Management Console
D. IBM solidDB, IBM InfoSphere CDC for solidDB, IBM DB2, IBM InfoSphere CDC for DB2, IBM
InfoSphere CDC Replication Center, and IBM InfoSphere CDC Management Console
Answer: A

IBM   000-550자격증   000-550자격증   000-550

NO.8 To set up solidDB in a standalone, HotStandby or Universal Cache configuration, where can the
configuration be performed?
A. The configuration is performed from the command line using the solid command with suitable
option settings and values.
B. The configuration needs to be set in a solid.ini file.
C. The configurations can be set up by using the solsql tool and the operating system services file.
D. The standalone configuration is set in the solid.ini file while the HotStandby and Universal
Cache configuration is set using the sqlcon tool.
Answer: B

IBM   000-550 dump   000-550자격증   000-550

NO.9 After completing the upgrade of the Primary server while performing a cold HSB-incompatible
upgrade, what is the correct sequence of steps to upgrade to the Secondary server?
A. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal operation.
B. Upgrade both servers; start and verify that the upgrade Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ACTIVE state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
C. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ACTIVE state; start the Secondary server and verify that it is in a SECONDARY ALONE state;
perform a 'hsb connect' command to resynchronize the servers and restore to normal operation.
D. Upgrade both servers; start and verify that the upgraded Primary server is in a PRIMARY
ALONE state; start the Secondary server and verify that it is in a SECONDARY ALONE state;
perform a 'hsb netcopy' command followed by 'hsb connect' to resynchronize the servers and
restore to normal operation.
Answer: D

IBM자격증   000-550   000-550   000-550덤프

NO.10 Which statement regarding IBM solidDB Netbackup is true?
A. One IBM solidDB Netbackup Server can only serve one backup source server.
B. The command ADMIN COMMAND 'netbackup' is supported within the [Srv]At configuration
parameter.
C. NetBackup copies logical database consisting of multiple files to one flat file to the
NetBackupDirectory by default.
D. If the specified remote directory does not exist, it is not created automatically by the solidDB
Netbackup Server.
Answer: C

IBM   000-550   000-550 dumps

NO.11 You have setup solidDB Universal Cache such that you have a table DBA.ORG in the solidDB
front-end, being mirrored to a back-end database. After some time, you notice that the
subscription is Inactive and you try to start Mirroring (Continuous). The subscription state remains
Inactive and the Event Log shows that the structure of table DBA.ORG has changed. What is the
recommended course of action?
A. In solidDB, drop the ORG table and recreate it; then restart the subscription.
B. In the backend database, drop the ORG table and recreate it; then restart the subscription.
C. In solidDB, change the table definition to what it was previously; then restart the subscription.
D. In the Management Console, use the 'Update table definition' option, for the source in the Table
Mappings area; then restart the subscription.
Answer: D

IBM최신덤프   000-550   000-550 dumps

NO.12 How many different installations of solidDB binaries can exist on the same host?
A. one
B. as many as can fit
C. one per release of solidDB
D. one per version of solidDB
Answer: B

IBM인증   000-550최신덤프   000-550기출문제   000-550   000-550 pdf   000-550인증

NO.13 It is possible when using solsql to run scripts either interactively or nested within another script.
Which special character is used to identify that you want to execute a script file?
A. &
B. @
C. #
D. !
Answer: B

IBM   000-550   000-550   000-550

NO.14 What are two possible conflict resolution methods between solidDB and a back-end database?
(Choose two.)
A. Source wins
B. Reference
C. Trigger
D. UserExit
E. Alert user
Answer: A,D

IBM덤프   000-550시험문제   000-550   000-550덤프

NO.15 Click the Exhibit button.
In the exhibit, what does the attached replication diagram show?
A. All subscriptions are Mirroring Continuous.
B. The subscription FERO_BERW is Inactive.
C. The subscription FERO_BERW is Mirroring Continuous.
D. All subscriptions are using bidirectional Mirroring Continuous.
Answer: C

IBM자료   000-550   000-550최신덤프   000-550   000-550덤프   000-550

NO.16 To execute the admin command "status", what is the correct syntax?
A. solsql -e "COMMAND 'status' " "tcp 1313" dba dba
B. solsql -f "ADMIN STATUS 'status' " "tcp 1313" dba dba
C. solcon "status" "tcp 1313" dba dba
D. solcon -e "status" "tcp 1313" dba dba
Answer: D

IBM   000-550   000-550   000-550 dumps

NO.17 What are two methods for generating a trace file containing database statement executions
occurring in the solidDB server? (Choose two.)
A. Enable SQL tracing within the solidDB server.
B. Enable ODBC tracing within the solidDB ODBC driver.
C. Enable ODBC tracing within the ODBC Driver Manager.
D. Enable JDBC tracing within the solidDB JDBC driver.
E. Enable JDBC tracing within the JDBC Driver Manager.
Answer: A,C

IBM   000-550자료   000-550시험문제   000-550최신덤프

NO.18 Which two are directly visible in solidDB server-side SQL Tracing? (Choose two.)
A. longest lasting statements in duration order
B. timestamps of statement preparation
C. timestamps of individual fetch operations
D. timestamps of individual rpc_session operations.
E. list of statements currently under execution
Answer: B,C

IBM pdf   000-550 dumps   000-550기출문제   000-550기출문제   000-550자료   000-550

NO.19 What are two effective ways to increase the throughput of replication between the solidDB in-
memory cache and a back-end database? (Choose two.)
A. Add a summarization column to the source.
B. Use multiple subscriptions instead of just one.
C. Update the mirror_commit_after_max_transactions parameter to a higher value.
D. Ensure that the conflict resolution mechanism is set to "source".
E. Use only the Mirror (Continuous) form of replication.
Answer: B,C

IBM   000-550 pdf   000-550기출문제   000-550시험문제

NO.20 When setting the [HotStandby]SafenessLevel = Auto, which two statements are true about
transaction durability and HotStandby safeness level? (Choose two.)
A. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 1(Relaxed).
B. SafenessLevel switches to 2-safe when using [Loggng]DurabilityLevel = 2(Adaptive).
C. SafenessLevel switches to 1-safe when using [Logging]DurabilityLevel = 3(Strict).
D. SafenessLevel switches to 2-safe when using [Logging]DurabiltyLevel = 4(Custom).
E. SafenessLevel switches to 1-safe when using [Logging]DurabiltyLevel = 2(Adaptive).
Answer: A,B

IBM인증   000-550 dumps   000-550   000-550   000-550

ITExamDump 에서 출시한 IBM인증000-550시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한IBM인증000-550덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.