ITExamDump에서 제공되는IBM 000-606인증시험덤프의 문제와 답은 실제시험의 문제와 답과 아주 유사합니다. 아니 거이 같습니다. 우리ITExamDump의 덤프를 사용한다면 우리는 일년무료 업뎃서비스를 제공하고 또 100%통과 율을 장담합니다. 만약 여러분이 시험에서 떨어졌다면 우리는 덤프비용전액을 환불해드립니다.
ITExamDump의 IBM 000-606덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 IBM 000-606덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.
ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여IBM 000-606관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리IBM 000-606도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.
IBM인증000-606시험을 위하여 최고의 선택이 필요합니다. ITExamDump 선택으로 좋은 성적도 얻고 하면서 저희 선택을 후회하지 않을것니다.돈은 적게 들고 효과는 아주 좋습니다.우리ITExamDump여러분의 응시분비에 많은 도움이 될뿐만아니라IBM인증000-606시험은 또 일년무료 업데이트서비스를 제공합니다.작은 돈을 투자하고 이렇게 좋은 성과는 아주 바람직하다고 봅니다.
시험 번호/코드: 000-606
시험 이름: IBM (IBM WebSphere Business Modeler Advanced Edition V7.0, Business Analysis and Design)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 110 문항
업데이트: 2013-09-26
ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의IBM인증 000-606덤프는 이해하기 쉽고 모든IBM인증 000-606시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
000-606 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-606.html
NO.1 A process analyst is simulating a process and the results indicate excessive wait times at some of the
activities. Which static analysis report would be useful in determining the cause of the excessive wait
times?
A. Activities by organization
B. Activity cost and duration
C. Activity resource and role leveling
D. Qualified resources for role
Answer: C
IBM dump 000-606 000-606 000-606 000-606 000-606
NO.2 To display the names of all tasks in a process model in a table format, what must the process analyst
do to accurately define the table after adding the table to the report template?
A. 1. In the Properties View for the table, populate the Grouped By Field by navigating to and selecting the
immediate parent of the data to be displayed.
2. Select the appropriate table cell.
3. In the Properties View for the table cell, populate the Data Field Name by navigating to and selecting
the data element to be displayed.
B. 1. In the Properties View for the table, populate the Grouped By Field by navigating to and selecting the
immediate parent of the data to be displayed.
2. Create a Data Field within the appropriate table cell.
3. In the Properties View for the Data Field, populate the Data Field Name by navigating to and
selecting the data element to be displayed.
C. 1. In the Properties View for the table, populate the Data Field Path by navigating to and selecting the
immediate parent of the data to be displayed.
2. Select the appropriate table cell.
3. In the Properties View for the Data Field, populate the Data Field Path by navigating to and selecting
the data element to be displayed.
D. 1. In the Properties View for the table, populate the Data Field Path by navigating to and selecting the
immediate parent of the data to be displayed.
2. Create a Data Field within the appropriate table cell.
3. In the Properties View for the Data Field, populate the Data Field Path by navigating to and selecting
the data element to be displayed.
Answer: B
IBM dump 000-606자격증 000-606 000-606시험문제
NO.3 Which predefined process report shows the sequence of steps within a process and the relationships
of a process to other processes?
A. Process Details Report
B. Process Procedure Report
C. Process Specification Report
D. Process Level Details Report
Answer: B
IBM 000-606덤프 000-606 pdf
NO.4 Which of the following is an example of a Key Performance Indicator (KPI)?
A. Supplier response time.Supplier? response time.
B. Customer Order processing time.
C. Order must be processed within 3 days.
D. Working duration of a business process.
Answer: C
IBM자격증 000-606 dump 000-606기출문제 000-606 dump
NO.5 Which steps would a process analyst take when conducting a simu-lation of "what-if" scenarios for a
business process instance?
A. Make a copy of the simula-tion snapshot, rename it, change the attributes for the "what-if" scenario and
re-run the simula-tion and analyze the results
B. Make a copy of the simula-tion profile, rename it, change the simula-tion attributes for the "what-if"
scenario and re-run the simula-tion and analyze the results.
C. Right click on the simula-tion profile, select Profile Analysis > New Profile and change the attributes for
the "what-if" scenario and then re-run the simula-tion and analyze results
D. Right click on the simula-tion snapshot, select Profile Analysis > Profile Specification, and change the
attributes for the "what-if" scenario and then re-run the simula-tion and analyze results.
Answer: B
IBM자격증 000-606 000-606자료
NO.6 A process analyst runs a simu lation that yields inaccurate results. Which analysis would a process
analyst use to identify looping paths in the process?
A. Path Cycles
B. Activity Throughput
C. Activities Unable to Start
D. Paths Unable to be Followed
Answer: A
IBM 000-606 000-606기출문제 000-606 000-606 000-606
NO.7 Refer to the Exhibit.
A process analyst needs to simulate the behavior of the whole business process. How should the
simula-tion profile be set to accomplish this requirement?
A. Set the simula-tion to Evaluate all sub processes.
B. Set the Maximum number of process invocation to 10.
C. Set the simula-tion to Use resource time required as a task processing time.
D. Set the date of the Process availability ends greater than the Process availability begins.
Answer: A
IBM시험문제 000-606자료 000-606 000-606 000-606
NO.8 A loan business process has an activity that has a role and a resource assigned. The role cost is $100
and the resource cost is $200. When the process is simulated what is the activity total cost?
A. The role cost ($100).
B. The resource cost ($200).
C. The sum of role and resource cost ($300).
D. The role cost multiplied by the activity duration.
Answer: B
IBM dumps 000-606기출문제 000-606 dumps 000-606 000-606
NO.9 A process analyst has performed simu-lation upon a business process and is analyzing resource
allocation within the process. The average elapsed duration for the process is 2 hours, 57 minutes. After
running the Process Resource Dynamic Analysis Report, it is observed that the Field Tech Resource has
an average Quantity Allocated value of .6 units. The Process Resource Allocation Dynamic Analysis
Report is also generated against the simu-lation results, and it is determined that there is an Average
Shortage Duration of 37 minutes, 30 seconds for the resource. The process analyst also observes that
the Field Tech Resource has been defined to the process as a bulk resource with an availability value of 3.
Based on this information, what conclusions can the process analyst draw?
A. There is at least one case in the business process that does not allocate the Field Tech Resource. The
pool of available Field Tech Resources can be reduced to 1 to eliminate resources that are never
allocated to the process. This will not affect the Average Shortage Duration value.
B. There are too many Field Tech Resources available to the process, as the sum of all Field Tech
Resource allocations to activities in the process divided by the total number of process instances is less
than one. This indicates that some Field Tech Resources are never allocated the business process.
C. There is at least one case in the business process that does not allocate the Field Tech Resource,
however there are also multiple concurrent process instances that are allocating the resource
concurrently and are competing for the resource. The pool of available Field Tech Resources can be
increased to reduce the Average Shortage Duration and the Average Quantity Allocated would increase to
a value close to 1.0 units.
D. There is at least one case in the business process that does not allocate the Field Tech Resource,
however there are also multiple concurrent process instances that are allocating the resource
concurrently and are competing for the resource. The pool of available Field Tech Resources can be
increased to reduce the Average Shortage Duration and the Average Quantity Allocated would remain the
same in subsequent simula-tions.
Answer: D
IBM자료 000-606 000-606
NO.10 Refer to the Exhibit.
A process analyst has modeled the current state of a mortgage approval process as shown in the Exhibit.
Historical process performance measurements have indicated when there is an error in the filing of the
mortgage documentation, the corrective activities increase the process duration by 50% and the process
cost by 35%. How can the process analyst prove the current state model reflects this situation?
A. Assign an exception classifier to each activity associated with incorrectly filed documentation.
Run simula-tion analysis upon the process and determine its average cost and duration from the
simula-tion control panel. Generate the Classifier Cost and Duration report upon the simula-tion
results.
Compare the process' average cost and duration against the Classifier report's values.
B. Assign an exception classifier to each activity associated with incorrectly filed documentation
Run simula-tion analysis upon the process and generate the Process Cases Summary report.
Determine which cases represent process instances that perform activities associated with
incorrectly filed documentation.
Compare the average cost and duration of these cases against cases that do not perform these
corrective activities.
C. Run simula-tion analysis upon the process and generate the Processes Cost Comparison
report to compare the cost of the process between cases that perform corrective activities against
those that do not.
Repeat this comparison for duration by generating and analyzing the Processes Duration
Comparison report.
D. Assign an exception classifier to each activity associated with incorrectly filed documentation.
Run simula-tion analysis upon the process and generate the Process Classifier Cost and Duration
report.
Compare the total average costs and durations of the exception classifier activities against non-
exception activities.
Answer: B
IBM덤프 000-606기출문제 000-606 000-606 pdf 000-606
NO.11 During an exception period, a resource could not complete a task before the end of the task's
processing time. What should be done to ensure that the resource remains allocated until the task is
completed?
A. Check "Use resources time required as a task processing time".
B. Check the preference "Run simula-tion without resource requirements".
C. Increase the "Task duration" to match the resource required time.
D. Set the task's "Resource wait time" to be the resource shortage time.
Answer: A
IBM 000-606 000-606 dumps
NO.12 A process analyst is performing "What-If" analysis upon a process model using simu lation. Work can
arrive into the process at anytime. It has been observed that the 5 defined Field Technician resources
have significant resource shortage durations. The process analyst assumes that making more Field
Technician resources available to the process would decrease the shortage duration. Based on this
assumption, the analyst increases the available resources to 10. Subsequent simu lations do not show
significant reduction in the resource shortage durations. What steps should the process analyst take to
resolve the resource shortage duration and make updates for further process improvement?
A. Increase the available resources for the Field Technician from 10 to 20 to reduce the resource shortage
duration.
B. Reallocate the defined Field Technicians to additional second shift and weekend shift availability to
remove resource shortage duration due to unavailability overnight and during weekends.
C. Increase the time interval within the simula-tion snapshot settings to spread out the arrival of tokens,
allowing more time for the Field Technician to complete work before new work arrives, thereby reducing
resource shortage durations.
D. Decrease the Resource Time Required for activities assigned to the field Technicians, allowing them to
spend less time on tasks and be able to address more activities in a given interval, thereby reducing
resource shortage durations.
Answer: B
IBM 000-606 000-606 000-606자격증 000-606시험문제
NO.13 A new payment process will be used to process transfer requests in the US and Europe where: 1)
payments should be processed on the same day of request Monday to Friday. 2) the number of European
and US requests is similar per day during normal working hours. Which option illustrates the input simu
lation setting that will help analyze this process?
A. Set a time trigger to receive requests assigning as start time a general timetable valid for the US and
Europe.
B. Set a time trigger to receive requests using a distribution with a general timetable for the US and
Europe.
C. Set a timetable trigger to receive requests assigning a general timetable valid for the US and Europe.
D. Set a timetable trigger to receive requests assigning a custom timetable specifying different periods for
the US and Europe.
Answer: D
IBM 000-606 000-606 000-606덤프 000-606 dumps 000-606 pdf
NO.14 A company's new approach to selling requires extensive resource planning. A team of process
analysts has been assembled to perform this work. Which option is sufficient to enforce consistent
simu-lations behavior across the team? All analysts:
A. set the same random number seed and process availability start and end dates in the simula-tion
profiles.
B. set the same random number seed, process availability start and end dates, and maximum simula-tion
duration in the simula-tion profiles.
C. set unique random number seed, process availability start and end dates, maximum simula-tion
duration and maximum number of process invocations in the simula-tion profiles.
D. set unique random number seeds and process availability start and end dates in the simula-tion
profiles.
Answer: A
IBM기출문제 000-606기출문제 000-606 000-606
NO.15 When is it applicable to use a query?
A. To extract and view information about the elements of models.
B. To extract, view and print information about the elements of models.
C. To extract and view information about model elements and simula-tion results.
D. To extract, view, and print information about model elements and simula-tion results.
Answer: A
IBM 000-606 000-606 000-606자격증
NO.16 A process analyst has completed a process model and is required to validate it. One of the validations is
to ensure that there are no potential situations where a sequence of activities can be repeated indefinitely.
Using Static Analysis, how can the process analyst quickly validate that there are no sequence of tasks
that can potentially loop endlessly.?
A. 1. Run the Path Cycles Report.
2. Identify the cycle name assigned to each path cycle in the process and correlate that back to the
process model.
B. 1. Run the Activity Throughput Report.
2. Identify the throughput of all activities that deliver more outputs per hour than anticipated.
C. 1. Run the Activities Unable to Start Report.
2. Identify any activities that were not able to be invoked within the process, locate the preceding
construct that connects a downstream activity's output to an upstream activity's input.
D. 1. Run the Paths Unable to be Followed Report.
2. Identify any paths that were not able to be invoked within the process, and locate the preceding
construct that connects a downstream activity's output to an upstream activity's input.
Answer: A
IBM 000-606 000-606자격증 000-606최신덤프
NO.17 A model is going to be simu-lated to capture results that represent as close to real conditions as
possible. What simu-lation setting should be used to ensure that the results reflect the random nature of
the process? The random number seed needs to be set to:
A. Zero
B. 1
C. 2
D. N
Answer: A
IBM 000-606 000-606자격증 000-606 000-606 000-606기출문제
NO.18 A process analyst has completed a future state process model and needs to validate it against process
improvement requirements. The future state process must be able to handle 25% more throughput than
the current state, while maintaining or improving process duration. Presently, the business process
handles 2000 requests daily. Using dynamic analysis, how can the process analyst validate whether the
future state process will satisfy these requirements?
A. 1. Simulate the current state process model at 2000 requests per day.
2. Simulate the future state process model at 2000 requests per day.
3. Generate a Processes Duration Comparison report to verify the Average Elapsed Duration of the
future state process model reflects a favorable percentage change over the current state process model.
B. 1. Simulate the current state process model at 2000 requests per day.
2. Simulate the future state process model at 2500 requests per day.
3. Generate a Processes Duration Comparison report to verify the Average Elapsed Duration of the
future state process model reflects a favorable percentage change over the current state process model.
C. 1. Simulate the current state process model at 2500 requests per day.
2. Simulate the future state process model at 2500 requests per day.
3. Generate a Processes Duration Comparison report to verify the Average Elapsed Duration of the
future state process model reflects a favorable percentage change over the current state process model.
D. 1. Simulate the future state process model at 2000 requests per day.
2. Simulate the future state process model at 2500 requests per day.
3. Generate a Processes Duration Comparison report upon the results of the future state process
model to verify the Average Elapsed Duration.
Answer: B
IBM 000-606 dump 000-606인증 000-606 000-606 dumps 000-606
NO.19 A process analyst needs to conduct analysis on cost and duration of marketing related tasks in the
current process. In the current process, there are five possible paths. The process analyst needs to
identify the cost and duration of marketing related tasks for each path. The process analyst has decided
to create a classifier of Marketing to be assigned to the tasks in the current process. Which analysis
should be used?
A. Activities by classifier analysis.
B. Classifier cost and duration analysis.
C. Process case summary analysis.
D. Process classifier cost and duration analysis.
Answer: D
IBM 000-606 000-606 pdf 000-606
NO.20 When reviewing the simu-lations results, the process analyst discovered that for each task in the
process that has multiple output criteria, the simula-tion engine would make a random selection of an
output path, and generate outgoing tokens for each output defined in the output criterion. Which of the
following settings was used during the simula-tion?
A. Randomly to a single path.
B. Based on an expression.
C. Based on probabilities to a single path.
D. Based on probabilities to multiple paths.
Answer: C
IBM pdf 000-606기출문제 000-606 000-606인증 000-606인증
ITexamdump의 1z0-599덤프의 VCE테스트프로그램과 70-462덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB6-870시험에 대비한 고품질 덤프와 HP0-J60시험 최신버전덤프를 제공해드립니다. 최고품질 NS0-504시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기