CIPS인증 A10시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의CIPS인증 A10덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의CIPS인증 A10덤프는CIPS인증 A10실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
요즘같이 시간인즉 금이라는 시대에, 우리 ITExamDump선택으로CIPS A10인증시험응시는 아주 좋은 딜입니다. 우리는 100%시험패스를 보장하고 또 일년무료 업데이트서비스를 제공합니다. 그리고 시험에서 떨어지셨다고 하시면 우리는 덤프비용전액 환불을 약속 드립니다.
멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. CIPS인증 A10시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의CIPS인증 A10덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의CIPS인증 A10덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.
시험 번호/코드: A10
시험 이름: CIPS (Measuring Performance in Purchasing and Supply)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 142 문항
업데이트: 2013-12-18
CIPS A10인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.CIPS A10시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는CIPS A10관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸CIPS A10관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게CIPS A10응시하는데 많은 도움이 될 것입니다.
A10 덤프무료샘플다운로드하기: http://www.itexamdump.com/A10.html
NO.1 CORRECT TEXT
Q17. Microfast Foods is concerned about the cost of holding large quantities of stocks for its food
processing operation, in particular the issue of the high cost of perishable ingredients and
'waste'. The company has no formal procedure for tracking levels and usage of inventory
within its stores. The managing director of Microfast has asked you to advise him as follows:
a) Briefly explain to the managing director why it is important to continually review and
measure inventory levels.
b) Within the stores and warehouse environment there are THREE factors that need to be
examined ?¡ìC Economy, Efficiency and Effectiveness ?¡ìC in relation to performance
measures. The managing director is unsure of the detail. Provide a brief explanation of
each in the context of this business.
CIPS A10 A10 dump
NO.2 Advanced Certificate in Purchasing and Supply
Measuring Performance in Purchasing and Supply
A10
Senior Assessor's Report
INFORMATION FOR CANDIDATES
The senior assessor??s report is written in order to provide candidates with feedback relating to
the examination. It is designed as a tool for candidates ?¡ìC both those who have sat the
examination and those who wish to use as part of their revision for future examinations.
Candidates are advised to refer to the Examination Techniques Guide (see the following link
http://www.cips.org/documents/ExaminationtechniquesguideFeb07.pdf) as well as this senior
assessor??s report.
The senior assessor??s report aims to provide the following information:
* An indication of how to approach the examination question
* An indication of the points the answer should include and how marks are allocated
* An indication of candidate performance for the examination question
APPENDIX
A syllabus matrix for the examination is included as an appendix. It highlights the learning
objectives of the syllabus unit content that each question is testing.
The unit content guides are available to download at the following link:
http://www.cips.org/studyqualify/cipsqualifications/syllabuses/
ADDITIONAL SOURCES OF INFORMATION
The Supply Management magazine is a useful source of information and candidates are advised
to include it in their reading during their study. Please see the following link to the Supply
Management website http://www.supplymanagement.com/
Analysis of Section A
Many candidates achieved moderate marks for this section. There were a few quite low scores
and very few high scores for this section, some candidates gaining 20/20 marks. Section A
questions are designed to test the candidates?? understanding of key purchasing principles and
knowledge of the syllabus.
I recommend that candidates practise questions from past papers in order to improve their
performance on this section ?¡ìC it is vital to be able to make the right decision from the four
available options, without spending too much time on the question.
SECTION B
Analysis of Section A
Many candidates achieved moderate marks for this section. There were a few quite low scores
and very few high scores for this section, some candidates gaining 20/20 marks. Section A
questions are designed to test the candidates?? understanding of key purchasing principles and
knowledge of the syllabus.
I recommend that candidates practise questions from past papers in order to improve their
performance on this section ?¡ìC it is vital to be able to make the right decision from the four
available options, without spending too much time on the question.
SECTION B
Question 11
Answer should identify FIVE of the following key points (1 mark was allocated for each correct
point) - initial briefing regarding performance areas, identification of what the organisation requires
from the employee, highlighting of any problems, is performance on track?, feedback during the
meeting, can the employer provide any assistance and have any training needs been identified.
The qualities of responses to this question were quite high and many candidates scored a good
level of marks.
Question 12
Candidates were required to LIST any FIVE of the following - increased leverage, ease of control
of fewer suppliers, greater opportunities of negotiation, increased joint development potential,
value adding initiatives may be explored, more use of supplier agreements, less transactional
activity, more use of strategic procurement.
The majority of candidates answered this question very well, with strong responses giving four or
five correct points. Weaker answers gave incorrect examples of the benefits of reducing the total
number of suppliers.
Question 13
Candidates were required to explain TWO ways in which purchasers could achieve continuous
professional development. Candidates should recognise that 2 ? marks are available for the
explanation of each 'way'. This breaks down as 1 mark available for identification of each method
with up to a further 1? marks available for the explanation of how the method used would benefit
the purchaser (or their employer). Areas that answers could include were: own study, attendance
at professional association meetings, attendance on courses/distance learning, formal training,
site visits, job rotation, or academic achievement.
The overall approach to this question could have been better. This is a key section within the
learning outcomes of this unit and many candidates performed poorly and identified areas that
were irrelevant to the context of the question. A few strong answers managed to correctly identify
two ways and briefly explained the value of the concept, in the context of purchaser's professional
development.
Question 14
Part (a) asked for THREE correctly titled key performance indicators (KPIs), for example, stockturns,
service levels, stock damage, stock accuracy, accuracy of pick rates (1 mark for each
appropriate KPI, up to 3 marks). Part (b) required candidates to explain how the use of KPIs can
improve the management of stock.
Many candidates gave incorrect KPIs for part (a), or failed to list insufficient KPIs. Many poor
answers focused on efficiency and effectiveness, rather than actually identify a KPI measure.
Following on from this part (b) was poorly answered as a result of the candidate failing to
understand the context of the question. This is a key part of the unit content and it is important that
candidates address this syllabus topic.
Question 15
Benchmarking is a key concept and allows buyers to assess the suitability or performance of a
supplier when compared to a known standard.
Part (a) required candidates to describe the purpose of supplier benchmarking. Benchmarking
provides information which may be used to select the correct supplier or motivate a potential
supplier to improve its products or overall performance.
Part (b) required candidates to list two problems that can be encountered with benchmarking.
There were many weak answers to this question and this may suggest a knowledge gap in the
candidates who sat this paper. Many responses gave a poor or inappropriate response to part (a)
and incorrect examples for part (b). Some answers gained marks for part (b) but were awarded no
marks for an incorrect answer to part (a).
Question 16
Candidates were required to explain TWO measurements that contribute to a simple vendor
measurement system. Examples that could have been explained are: quality ?¡ìC quantity of
acceptable deliveries as a percentage, deliveries ?¡ìC percentage of accurate on-time deliveries,
after sales service ?¡ìC response time set against an agreed target
Many candidates scored highly on this question by correctly identifying two measures and then
giving an appropriate explanation. A few candidates gave inappropriate answers or failed to
adequately explain what the measure was.
Topic 4, E
E
CIPS A10 A10 dump
NO.3 CORRECT TEXT
Q16. Identify FIVE areas that should be covered when appraising the buyer's performance.
Topic 1, D
D
CIPS A10 A10 dump
NO.4 THE CHARTERED INSTITUTE OF PURCHASING &SUPPLY
ADVANCED CERTIFICATE IN PURCHASING AND SUPPLY
Measuring Performance in Purchasing and Supply Management
A10
INSTRUCTIONS FOR CANDIDATES
*Ensure that you have been handed the correct examination paper.
*Ensure that you have been handed the correct examination paper.
*SECTION B: Questions 11?¡ìC16 are worth 5 marks each. You are advised to spend
approximately 50 minutes on this section.
*SECTION C: Questions 17?¡ìC19 require full answers with examples where appropriate.
Question 17 is worth 20 marks. Questions 18 and 19 are worth 15 marks each. You are advised to
spend a minimum of half an hour on each question.
*Answers should be written in this answer booklet in the spaces provided. If you require
continuation paper you should request this from the invigilator. Your candidate number and
question number must be clearly marked on each sheet of continuation paper.
*All answers must be written in ink. Pencil should only be used where graphs/diagrams are
required. Cross out any work which you do not wish to be examined.
*Rough working must be shown, and crossed out.
*The use of silent, battery-operated, non-programmable calculators is permitted.
CIPS A10 A10 dump
NO.5 Q6. Which of the following tools of analysis can be used to classify stock?
A. Value chain analysis
B. ABC analysis
C. SMART analysis
D. Quantum analysis
Topic 1, D
D
NO: 8 CORRECT TEXT
Q17. An organisation wishes to review its procurement processes to try and achieve
operational benefits.
You have been asked by the senior materials manager to advise on how the
process should proceed, as follows:
(a) List THREE key tasks where buyers' performance is directly linked to the
objectives of supply management.
(b) For each of the three key tasks, give an example of how the purchaser??s
performance could be measured.
(c) Explain how a review of these key tasks could benefit an organisation.
Topic 5, B
B
9.
Q2. Which of the following is Pareto's Law?
A. The law of supply and demand
B. The law of vendor rating
C. The 80/20 rule
D. The 90/30 rule
10.
Q3. Which one of the following is a recognised measure of financial performance?
A. Stock exchange viability test
B. CLIP performance
C. Net profit before tax
D. Sales analysis
CIPS A10 A10 dump
NO.6 Topic 1, D
D
1. CORRECT TEXT
Q11. Identify the FIVE stages that should be followed to ensure an effective staff appraisal.
Topic 2, F
F
CIPS A10 A10 dump
NO.7 Q3. Which one of the following performance indicators is best used to assess whether there are
slow moving stock items in a store?
A. Total number of items held
B. Average number of stock issues over a period
C. Total value of stock held
D. Average number of deliveries received
Topic 3, A
A
CIPS A10 A10 dump
ITexamdump의 000-274덤프의 VCE테스트프로그램과 FCNSA.v5덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-Z24시험에 대비한 고품질 덤프와 1Z1-061시험 최신버전덤프를 제공해드립니다. 최고품질 640-916시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기