IBM 인증000-438인증시험공부자료는ITExamDump에서 제공해드리는IBM 인증000-438덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.
아직도 IBM인증000-438시험준비를 어떻게 해야 할지 망설이고 계시나요? 고객님의 IT인증시험준비길에는 언제나 ITExamDump가 곁을 지켜주고 있습니다. ITExamDump시험공부자료를 선택하시면 자격증취득의 소원이 이루어집니다. IBM인증000-438시험덤프는ITExamDump가 최고의 선택입니다.
여러분은IBM 000-438인증시험을 패스함으로 IT업계관련 직업을 찿고자하는 분들에게는 아주 큰 가산점이 될수 있으며, 성덩한 IT업계사업자와 한걸음 가까와 집니다.
IBM인증 000-438시험을 패스해서 자격증을 취득하려고 하는데 시험비며 학원비며 공부자료비며 비용이 만만치 않다구요? 제일 저렴한 가격으로 제일 효과좋은ITExamDump 의 IBM인증 000-438덤프를 알고 계시는지요? ITExamDump 의 IBM인증 000-438덤프는 최신 시험문제에 근거하여 만들어진 시험준비공부가이드로서 학원공부 필요없이 덤프공부만으로도 시험을 한방에 패스할수 있습니다. 덤프를 구매하신분은 철저한 구매후 서비스도 받을수 있습니다.
시험 번호/코드: 000-438
시험 이름: IBM (Applying Fundamentals of Tivoli Business Automation Mgt2008)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 92 문항
업데이트: 2014-03-24
000-438 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-438.html
NO.1 Before a requirements gathering session with the implementation team for a client project, the
customer liaison presents a list of experts. Later, at the requirements gathering session, it is apparent that
a team member would be a valuable expert for the project. What is the appropriate way to have this
person identified as an expert on the project?
A. begin copying the additional team member on all project communication
B. bypass the identified expert and begin communicating directly with the team member
C. communicate to the customer liaison that the team member has been included as an expert
D. contact the customer liaison, explain the situation, and ask for the appropriate way to have this person
included as an expert
Answer: D
IBM 000-438 000-438시험문제
NO.2 What is a benefit of a single vendor solution?
A. easier to obtain maintenance and support
B. more likely to provide future business automation flexibility
C. greater likelihood of future stability in the business automation
D. easier to adapt new solutions from the Open Source community
Answer: A
IBM 000-438자료 000-438 000-438자격증 000-438시험문제 000-438덤프
NO.3 While scheduling the introductory meeting with a company, who should be the client contact for
invitations to the introductory meeting?
A. the technical contact
B. the process manager
C. the customer sponsor
D. the administrative assistant to the process manager
Answer: C
IBM 000-438 000-438
NO.4 After business automation roles are understood and organizational information is acquired, which
steps are taken to align business automation roles with individual employees?
A. interview individuals, determine responsibilities, document roles
B. interview individuals, determine responsibilities, review with client
C. interview individuals, verify job titles, determine experience, document roles
D. identify individuals, document roles and responsibilities, provide information to client for review
Answer: B
IBM자격증 000-438 000-438 000-438 pdf 000-438 000-438
NO.5 A client has a custom-made management system that they developed in-house that must be
integrated with the business automation solution. What is the correct approach for proving the
integration?
A. prove with an on-site Proof of Concept
B. replace the application with new software
C. re-create in a lab and provide an off-site proof of technology
D. develop the integration as part of the full solution deployment
Answer: A
IBM dump 000-438최신덤프 000-438 000-438시험문제
NO.6 After business requirements and processes have been identified, which steps are taken to automate
that process?
A. assess the specific steps required, determine critical processes, inform the client
B. determine critical processes, choose a subset of processes for a pilot, inform the client
C. assess the specific steps required, interview business process owners, inform the client
D. define the specific steps of the manual process, understand input and output functions of each step
within the process, determine steps suitable for automation
Answer: D
IBM최신덤프 000-438 000-438
NO.7 In Business Automation Management, what are performance, maintainability, and security
requirements considered to be?
A. automations
B. network events zones
C. functional requirements
D. non-functional requirements
Answer: D
IBM pdf 000-438 pdf 000-438자료
NO.8 Which factor is most significant when determining the viability of applications?
A. the number of users of the application
B. end user perception of the application
C. the software vendor's market capitalization
D. the flexibility, supportability, performance and coverage of the application
Answer: D
IBM자격증 000-438덤프 000-438 000-438자료
NO.9 In the first meeting with a customer, a half hour is dedicated to the meeting with a hard stop at the end.
The following roles are represented: the CIO, the CTO, a technical network professional, and an
application specialist. What should be the Solution Advisor's first step?
A. after brief introductions, discuss a high-level overview of their needs
B. focus on the CIO and the CTO, assuming there will be time to talk to the other attendees later
C. after brief introductions, have the network professional provide a diagram of the network data flow to
illustrate the problem
D. review the overriding business objective in the first ten minutes and move into a high-level, technical
overview of the solution
Answer: B
IBM최신덤프 000-438덤프 000-438 000-438
NO.10 What is an important factor when deploying a business automation solution into a customer
environment?
A. determine if a business automation solution was previously attempted
B. redefine the current workflows and practices used by the customer for business automation
C. gather the requirements for which business automation solutions will be deployed at a later date
D. set the expectations so that the client's strategic goals are clearly defined and are met by the business
automation solution
Answer: D
IBM자료 000-438 000-438 pdf 000-438자료 000-438
NO.11 A client's support staff and stakeholders are interviewed and pertinent data has been supplied.
Which three steps should be taken to understand the customer business automation goals? (Choose
three.)
A. list the experts related to business automation
B. identify the resource commitment from the client decision makers
C. determine any business automation dependencies in the business
D. define the business dependencies stated by the client's decision makers
E. identify the hardware requirements of the solution as defined by the customer
F. define the operational performance characteristics of the user interface for the solution
Answer: BCD
IBM 000-438 000-438
NO.12 Which two components of an existing infrastructure should be captured in initial business automation
requirement planning meetings with a client? (Choose two.)
A. Availability Monitoring
B. Performance Management
C. Human Resources Systems
D. Call Management Applications
E. Accounting Management Systems
Answer: AB
IBM 000-438 000-438 000-438
NO.13 Which action is necessary for analyzing the underlying applications supporting a client's legacy
process?
A. contact the vendor for customer support information
B. determine the vendor, revision, and customer subject matter expert of each underlying application
C. determine the best practice implementation recommendations of each underlying legacy application
D. contact the customer subject matter expert to determine possible integration points for integration with
IBM products
Answer: B
IBM 000-438 dump 000-438최신덤프 000-438 000-438 dumps
NO.14 A consultant is mapping a client business processes to client-identified pain points.
Which method should the consultant use to help the client rank their pain points?
A. build a table with each business process, and associated pain, weighting each on a scale of 1-10 and
review it with the client
B. investigate business type (Telecommunications, Enterprise, Government Agency or Small/Medium
business) and identify organizational structure and size
C. determine how existing business automation processes can be used to alleviate the client pain points
and how those processes will be mapped to take the client requirements into account
D. break down the high-level business processes into low-level component processes and create a
document that shows the relationship between the low-level and high-level business processes
Answer: A
IBM덤프 000-438 dump 000-438
NO.15 A telecommunications company configures their network equipment after receiving an order for a new
circuit from one of their customers. What is this an example of?
A. an automation
B. a key performance indicator
C. a low-level business process
D. a high-level business process
Answer: C
IBM dumps 000-438 pdf 000-438 000-438 000-438
NO.16 A client core business is to supply widgets to the customer. An order desk is located in Florida, where
desktops are used by employees for general Lotus Notes e-mail, Lotus Sametime, and an Order
Application from customers who call in orders by telephone.
The client has a data center located in Oregon. It contains a distributed environment running Lotus Notes
and Lotus Sametime and a distributed environment running JD Edwards EnterpriseOne ERP. It has a
DB2 database on a mainframe that contains their product information and stock, and a distributed
environment that runs the Order Application.
The client has a distribution center in Illinois. It contains a distributed front-end for the Order Application,
which prints orders and allows the distribution center to update the amount of stock. Orders are fulfilled by
the distribution center and mailed directly to the customer. Stock is also received and updated by the
distribution center.
The IT group responsible for the Order Application wants to implement Change Management and target
the Order Application as the first application to manage.
Who are two Order Applications customers? (Choose two.)
A. the distribution center in Illinois
B. customers who call in their orders
C. the mainframe system administrators
D. end users in the order desk environment
E. the Order Application distributed environment system administrators
Answer: BD
IBM 000-438기출문제 000-438 000-438 dumps 000-438 pdf
NO.17 Which two factors have the greatest impact on the scope and scale of a Business Process
Management solution? (Choose two.)
A. total headcount at each site
B. number of events processed per hour
C. gross e-commerce order volume per day
D. number of DNS names owned by the enterprise
E. number of integration points between subsystems
Answer: BE
IBM 000-438자격증 000-438
NO.18 Which two steps should be performed after the interviews are completed and all third-party integrations
are identified? (Choose two.)
A. create a hardware solutions guide
B. review the list of client third-party applications
C. identify the relationships with support organizations
D. identify the operational support dashboard methodology
E. review the list of proposed business automation products
Answer: BE
IBM 000-438 dumps 000-438최신덤프 000-438 000-438 000-438기출문제
NO.19 What are the two best ways to identify and prioritize functional requirements for an automation?
(Choose two.)
A. based on personal expertise
B. based on current clients with similar networks
C. based on the client interviews reviewing their pain points
D. based on a clear understanding of the client's business processes
E. based on talking with the operators and asking them what they want
Answer: CD
IBM 000-438 000-438
NO.20 Which two pieces of information are mapped against functional paths within an organization? (Choose
two.)
A. roles
B. stakeholders
C. requirements
D. responsibilities
E. IBM Tivoli products
Answer: AD
IBM 000-438 000-438 pdf
ITexamdump의 NS0-155덤프의 VCE테스트프로그램과 98-372덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-415시험에 대비한 고품질 덤프와 IIA-CGAP시험 최신버전덤프를 제공해드립니다. 최고품질 700-303시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기