Microsoft MB7-516 시험문제

ITExamDump는Microsoft인증MB7-516시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Microsoft인증MB7-516시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Microsoft인증MB7-516시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.

ITExamDump에서 Microsoft인증 MB7-516덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Microsoft인증 MB7-516덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.

Microsoft인증 MB7-516시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Microsoft인증 MB7-516시험을 패스하려면 ITExamDump의Microsoft인증 MB7-516덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Microsoft인증 MB7-516덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.

ITExamDump의 Microsoft인증 MB7-516시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Microsoft인증 MB7-516덤프가 신뢰성을 다시 한번 인증해주는것입니다. Microsoft인증 MB7-516시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Microsoft인증 MB7-516덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

시험 번호/코드: MB7-516
시험 이름: Microsoft (NAV 5.0 C/SIDE Solution Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 90 문항
업데이트: 2014-04-24

MB7-516 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB7-516.html

NO.1 What can be determined from viewing the following C/AL command?
CustProcessCode.Update(Customer);
A. A variable has been declared with the name CustProcessCode, the variable refers to a complex data
type, and the object referred to contains a function named Update.
B. The Customer table will be updated if the command is executed.
C. The Customer table has a function named Update.
D. A variable named CustProcessCode has been declared with a subtype of Codeunit, and has a function
that updates the Customer table.
Answer: A

Microsoft dumps   MB7-516시험문제   MB7-516   MB7-516기출문제   MB7-516

NO.2 Which of the following is a valid FILE function?
A. TRUNCATE
B. BINARYMODE
C. EXISTS
D. WRITELINE
Answer: C

Microsoft dump   MB7-516인증   MB7-516

NO.3 You are writing code in C/SIDE. Assuming that you are in a transaction, which of the following ends a
transaction?
A. EndTrans
B. Commit
C. StartTrans
D. PostTrans
Answer: B

Microsoft인증   MB7-516   MB7-516   MB7-516

NO.4 Select the SETFILTER line that is equivalent to: Customer.SETRANGE('No.', LowValue, HighValue);
A. Customer.SETFILTER('No.', '%1|%2', LowValue, HighValue);
B. Customer.SETFILTER('No.', LowValue, HighValue);
C. Customer.SETFILTER('No.', '%1..%2', LowValue, HighValue);
D. Customer.SETFILTER('No.', LowValue..HighValue);
Answer: C

Microsoft기출문제   MB7-516   MB7-516최신덤프   MB7-516자료   MB7-516기출문제   MB7-516기출문제

NO.5 When upgrading MenuSuites, if a menu item has been added to a menu group that is no longer a part
of the upgraded MenuSuite, what happens to the menu item?
A. The menu item is deleted.
B. The menu item is placed in a Lost Items group at the bottom of the menu tree.
C. The menu item is placed in a Deleted Items group.
D. The menu item is highlighted at the top of the menu tree.
Answer: B

Microsoft자격증   MB7-516 dumps   MB7-516최신덤프   MB7-516인증

NO.6 Which property on a Subform control determine the form to be displayed?
A. FormID
B. SourceDataLink
C. SubFormID
D. SubFormLink
Answer: C

Microsoft자격증   MB7-516   MB7-516   MB7-516자료   MB7-516

NO.7 Form A calls a function in a Single Instance Codeunit and populates a global text variable with the
value "Red." Then, Form B calls the same function and populates the same text variable with the value
"Blue." Which of the following is TRUE if Form A were to then call another function in the same Single
Instance Codeunit and retrieve the same global text variable?
A. The value of the text variable is "Red."
B. The value of the text variable is "Blue."
C. The text variable contains a null value.
D. A LOCKTABLE error occurs.
Answer: B

Microsoft   MB7-516   MB7-516기출문제   MB7-516   MB7-516 dumps

NO.8 Which of the following is TRUE regarding exporting of MenuSuite objects?
A. MenuSuite objects can be exported in either MenuSuite (mns) or text (txt) format.
B. MenuSuite objects can only be exported in text (txt) format.
C. MenuSuite objects cannot be exported.
D. MenuSuite objects can be exported in either object (fob) or text (txt) format.
Answer: D

Microsoft   MB7-516   MB7-516   MB7-516덤프

NO.9 Under which circumstances is it possible to run a report in a modal fashion while in the middle of a
Transaction?
A. If the Request Form is shown modally before the report
B. If the report prepopulates all the needed information on the Request Form before it is displayed
C. If the Request Form is not shown
D. If the report has already been run once and the request form was properly filled in
Answer: C

Microsoft자격증   MB7-516   MB7-516   MB7-516 dump

NO.10 What is the result of executing the following commands, where Number is a variable declared of the
datatype Record
and subtype Integer? Number.Number := 10; Number.MODIFY;
A. The Number field of the current record stored in the Number variable will be changed to 10 in the
database.
B. A compile error will occur before the commands can be executed.
C. A run-time error will occur.
D. Record number 10 in the Integer table will be deleted and a new record inserted.
Answer: C

Microsoft   MB7-516   MB7-516 dumps   MB7-516덤프   MB7-516   MB7-516

NO.11 Which statement best describes how MenuSuite object changes are stored?
A. Each change is stored as a complete list of MenuSuite menus and items and replaces the previous
level.
B. Changes are stored as the difference between the previous MenuSuite level and the current one.
C. Only one MenuSuite level is stored which consists of all menu items.
D. MenuSuite changes are not stored.
Answer: B

Microsoft dump   MB7-516인증   MB7-516   MB7-516

NO.12 How can an element of an object be addressed in code?
A. Through an instance of the class definition
B. Through the normal syntax of a structured language
C. By using the dot operator
D. By using a pointer reference
Answer: C

Microsoft   MB7-516   MB7-516

NO.13 Which of the following controls cannot be contained in a subform?
A. Picturebox
B. Subform
C. Tablebox
D. Tab Control
Answer: B

Microsoft인증   MB7-516최신덤프   MB7-516시험문제   MB7-516최신덤프

NO.14 Which of the following is true regarding NODBC and multi-language capability?
A. NODBC is not multi-language enabled.
B. Only the Table Name is multi-language enabled.
C. The Table Name, Field Name, and OptionString values are multi-language enabled.
D. Only the data is multi-language enabled.
Answer: C

Microsoft최신덤프   MB7-516자격증   MB7-516자료   MB7-516시험문제

NO.15 Which of the following commands is best to use in C/AL to change a closing date to a normal date?
A. NORMALIZEDATE
B. COMPRESSDATE
C. WORKDATE
D. NORMALDATE
Answer: D

Microsoft dump   MB7-516덤프   MB7-516   MB7-516 pdf   MB7-516

NO.16 Which of the following is not true regarding Complex Data Types?
A. Complex data types have properties.
B. Complex data types have methods.
C. Addition or subtraction functions can be performed on complex data types.
D. Complex data types must be declared as either a global or local variable.
Answer: C

Microsoft   MB7-516   MB7-516인증   MB7-516인증

NO.17 In a Function, when a parameter is specified as Var, it means:
A. The parameter is passed as a variant.
B. The parameter is passed by value rather than reference.
C. The parameter has variable lengths.
D. The parameter is passed by reference rather than value.
Answer: D

Microsoft   MB7-516   MB7-516   MB7-516기출문제   MB7-516자료

NO.18 Which of the following is not a valid target for the WRITELINE method of an OutStream type variable?
A. BLOB
B. File
C. Report
D. Automation
Answer: C

Microsoft dump   MB7-516   MB7-516   MB7-516

NO.19 Which of the following is not a valid reason to apply Grouping in a Microsoft Dynamics NAV report?
A. To cause the report to print a new page for each Salesperson when printing a list of Customers
B. To print a subtotal of the Balance field for each Salesperson when printing a list of Customers C. To
cause two or more Customer reports to print simultaneously for each Salesperson
D. To cause the report to print a sub-heading each time the Salesperson code changes when printing a
list of Customers
Answer: C

Microsoft   MB7-516   MB7-516   MB7-516   MB7-516

NO.20 When must the SourceExpr property be populated for a Label control?
A. When the Label control is bound to a Textbox control
B. Never, there is no such property for Label controls
C. Only when the control is placed on an unbound form
D. When the ParentControl property of the Label control is set to the Source Table
Answer: B

Microsoft   MB7-516시험문제   MB7-516

ITexamdump의 LOT-405덤프의 VCE테스트프로그램과 M2040-725덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-145시험에 대비한 고품질 덤프와 000-456시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-027시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/MB7-516.html