ITExamDump는 유일하게 여러분이 원하는IBM인증000-418시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.
ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 IBM인증 000-418덤프를 공부해보세요.
ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다
ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.
시험 번호/코드: 000-418
시험 이름: IBM (IBM Websphere Datastage V.8.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 132 문항
업데이트: 2013-09-11
000-418 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-418.html
NO.1 When tuning a parallel process, it is necessary to measure the amount of system resources that are
used by each instance of a stage. Which two methods enable the collection of CPU time used by each
instance of a stage? (Choose two.)
A. Set the environment variable $APT_PM_PLAYER_TIMING=true.
B. Invoke vmstat before the job run and after the job completes.
C. Select the Record job performance data check box from Job Properties.
D. Set the environment variable $DS_MAKE_JOB_REPORT=2.
Answer: AC
IBM자격증 000-418 000-418인증 000-418 dumps 000-418 pdf
NO.2 You have created a parallel job in which there are several stages that you want to be able to re-use in
other jobs. Youdecided to create a parallel shared container from these stages. Identify two things that
are true about this shared container. (Choose two.)
A. It can be used in sequencer jobs.
B. It can take advantage of Run Time Column Propagation (RCP).
C. It can be used in Transformer stage derivations.
D. It can have job parameters to resolve stage property values.
Answer: BD
IBM시험문제 000-418 000-418
NO.3 Click the Exhibit button.You are asked to convert a relational source, as shown in the exhibit, into
three separate XML files. How would you accomplish this task?
A. Set "Output mode" setting "Aggregate all rows" under "Transformation Settings" of the Output link of an
XML Output stage.
B. Set "Output mode" setting "Use Trigger" on column "Customer ID" under "Transformation Settings" of
the Output link of an XML Output stage.
C. Set "Output mode" setting "Separate rows" on column "Customer ID" under "Transformation Settings"
of the Output link of an XML Output stage.
D. Set "Output mode" setting "Single row" under "Transformation Settings" of the Output link of an XML
Output stage.
Answer: D
IBM인증 000-418 000-418 000-418
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.4 Your job uses the MQ connector stage to read messages from an MQ queue. The job should retrieve
the message ID into the MessageID field and parse the payload into two fields: Name is to get the first ten
characters, Description is toget the remaining characters.What will accomplish this?
A. First column is MessageID as Binary 24; second column is Name as Binary 10; select
WSMG.MSPAYLOAD data element; third column is Description as VarBinary 200; select
WSMG.MSPAYLOAD data element.
B. First column is MessageID; select the WSMQ.MSGID data element for the Message ID field;second
column isDescription as VarBinary 200; third column is Name as Binary 10.
C. First column is MessageID; select the WSMQ.MSGID data element for the Message ID field; second
column is Name; select WSMG.MSPAYLOAD data element; third column is Description; select
WSMG.MSPAYLOAD data element.
D. First column is MessageID; select the WSMQ.MSGID data element for the Message ID field; second
column is Nameas Binary 10; third column is Description as VarBinary 200.
Answer: D
IBM 000-418 000-418인증 000-418
NO.5 A parallel job combines rows from a source DB2 table with historical information maintained in two
separate Oracle tables. Only rows in the DB2 source whose key values match either Oracle table are
output to a target Teradata table. Both Oracle tables have identical column definitions and are stored in
the same Oracle instance. Which two design techniques would satisfy this requirement? (Choose two.)
A. Using a master DB2 Enterprise stage, merge by dropping unmatched masters against a single Oracle
Enterprise stage with custom SQL with UNION ALL.
B. Combine the inputs from the DB2 Enterprise stage and two Oracle Enterprise stages using the Sort
options of theFunnel stage defined onthe key columns.
C. Use a separate Oracle Enterprise stage for each source table to a Funnel stage and then perform an
inner join withrows from a DB2 Enterprise stage.
D. Use a Lookup stage to combine the DB2 Enterprise input with each Oracle Enterprise reference link
using rangepartitioning to limit each reference by historical data values.
Answer: AC
IBM 000-418최신덤프 000-418 000-418 000-418
NO.6 Click the Exhibit button.In the exhibit, a Funnel stage has two Input Links. Input 1(Seq_File) comes
from a sequential file with set "Readers per Node" set to "2" , Input 2(Dataset) comes from a Data Set
created in parallel (three-way parallel). Within the Funnelstage, the funnel type is set to "Sequence". The
parallel configuration file contains three nodes.How many instances of the Funnel stage run in parallel?
A. 1
B. 2
C. 3
D. 6
Answer: C
IBM자료 000-418기출문제 000-418덤프 000-418 000-418덤프
NO.7 You are working on a job in which a sequential file cannot be read in parallel. In an attempt to improve
job performance, you first define a single large string column for the non-parallel sequential file read.
Which stage may be used to parse the large string in parallel?
A. the Column Import stage
B. the Column Export stage
C. the Make Vector stage
D. the Split Vector stage
Answer: A
IBM pdf 000-418 000-418자료 000-418자격증
NO.8 Click the Exhibit button.In the exhibit, how many parallel partitions will each DataStage operator run
without specifying a "node pool andresource constraint" or actual "node constraint"?
A. one
B. two
C. three
D. four
Answer: C
IBM인증 000-418 pdf 000-418덤프 000-418 000-418
NO.9 What is the lowest CPU cost partitioning method for parallel stage to parallel stage?
A. Range
B. Modulus
C. Entire
D. Same
Answer: D
IBM pdf 000-418 000-418기출문제 000-418시험문제
NO.10 In which two situations would you use the Web Services Client stage? (Choose two.)
A. You want to deploy a service.
B. You need the Web service to act as either a data source or a data target during an operation.
C. You do not need both input and output links in a single web service operation.
D. You need to create a WSDL.
Answer: BC
IBM시험문제 000-418 000-418자료 000-418
NO.11 Which three actions can improve sort performance in a DataStage job? (Choose three.)
A. Specify only the key columns which are necessary.
B. Use the stable-sort option to avoid the random ordering of non-key data.
C. Minimize the number of sorts used within a job flow.
D. Adjusting the "Restrict Memory Usage" option in the Sort stage.
E. Run the job sequentially so that only one sort process is invoked.
Answer: ACD
IBM 000-418 000-418 dump
NO.12 Which two steps are required to change from a normal lookup to a sparse lookup in an ODBC
Enterprise stage?(Choose two.)
A. Change the lookup option in the stage properties to "Sparse".
B. Replace columns at the beginning of a SELECT statement with a wildcard asterisk (*).
C. Establish a relationship between the key field column in the source stage with the database table field.
D. Sort the data on the reference link.
Answer: AC
IBM자격증 000-418 pdf 000-418자격증 000-418 000-418
NO.13 A DataStage job is sourcing a flat file which contains a VARCHAR field. This field needs to be mapped
to a targetfield which is a date. Which will accomplish this?
A. Use a Column Exporter to perform the type conversion.
B. DataStage handles the type conversion automatically.
C. Use the TimestampFromDateTime function in a Transformer.
D. Use the Modify stage to perform the type conversion.
Answer: D
IBM 000-418 000-418 000-418
NO.14 Which two methods can be used for adding messages to a message handler? (Choose two.)
A. Import message handler from existing message handler dsx.
B. Drag and drop a message from the job log onto the message handler.
C. Type in the message rule by hand.
D. Use the add rule to message hander interface.
Answer: CD
IBM인증 000-418 000-418 000-418 dumps 000-418자료
NO.15 What describes the column information specified in Orchestrate schemas? (Choose two.)
A. C++ data types, such as string[max 145]
B. column properties, such as nullability
C. SQL data types, such as Char(20)
D. record format information, such as record delimiter
Answer: AB
IBM 000-418 000-418 000-418자료
NO.16 Which three lookup types may be performed in the Lookup stage? (Choose three.)
A. Equality match
B. Negative match
C. Range on stream link
D. Range on the reject link
E. Range on the reference link
Answer: ACE
IBM기출문제 000-418 000-418 000-418
NO.17 When invoking a job from a third-party scheduler, it is often desirable to invoke a job and wait for its
completion in order to return the job's completion status. Which three commands would invoke a job
named "BuildWarehouse" in project DevProject and wait for the job's completion? (Choose three.)
A. dsjob -run -log DevProject BuildWarehouse
B. dsjob -run -jobstatus DevProject BuildWarehouse
C. dsjob -run -userstatus DevProject BuildWarehouse
D. dsjob -run DevProject BuildWarehouse
E. dsjob -run -wait DevProject BuildWarehouse
Answer: BCE
IBM 000-418 000-418 000-418 000-418 000-418 dump
NO.18 Your job is to setup credential mappings for DataStage developers within DataStage. Which two
statements are true?(Choose two.)
A. You must be a Information Server Suite administrator to complete this task.
B. You can create Information Server Suite users and groups in the Web console.
C. You can create new Information Server Suite users by using the DataStage Administrator.
D. You can create new users in the operating system level and map these credentials within DataStage
Administrator.
Answer: AB
IBM 000-418기출문제 000-418기출문제 000-418자료
NO.19 A job design reads from a complex flat file, performs some transformations on the data, and outputs
the results to a WISD output stage. What are two ways that parameter values can be passed to this job at
run-time? (Choose two.)
A. Pass the parameter values at the time of the service request.
B. Change the properties of the information provider and redeploy.
C. Include the parameter values in the data.
D. Execute a DSSetParam with the values at job execution time.
Answer: AB
IBM 000-418최신덤프 000-418기출문제 000-418 000-418
NO.20 Which three statements are true about File Sets? (Choose three.)
A. File sets are partitioned.
B. File sets are unpartitioned.
C. File sets are stored as a single file.
D. File sets are readable by external applications.
E. File sets are stored as header file and data files.
Answer: ADE
IBM dump 000-418 000-418 000-418자료
ITexamdump의 70-486덤프의 VCE테스트프로그램과 ICBB덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-585시험에 대비한 고품질 덤프와 70-323시험 최신버전덤프를 제공해드립니다. 최고품질 000-955시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기