목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? Genesys인증 GE0-703시험을 패스하는 길에는ITExamDump의Genesys인증 GE0-703덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의Genesys인증 GE0-703덤프는 시험문제에 초점을 두어 제작된 공부자료이기에Genesys인증 GE0-703패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.
Genesys인증 GE0-703 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Genesys인증 GE0-703 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Genesys인증 GE0-703 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.
Genesys인증 GE0-703시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신Genesys인증 GE0-703시험에 대비한Genesys인증 GE0-703덤프를 발췌하였습니다. Genesys인증 GE0-703덤프는Genesys인증 GE0-703시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 Genesys인증 GE0-703덤프를 추천합니다.
ITExamDump의 제품을 구매하시면 우리는 일년무료업데이트 서비스를 제공함으로 여러분을 인증시험을 패스하게 도와줍니다. 만약 인증시험내용이 변경이 되면 우리는 바로 여러분들에게 알려드립니다.그리고 최신버전이 있다면 바로 여러분들한테 보내드립니다. ITExamDump는 한번에Genesys GE0-703인증시험을 패스를 보장합니다.
시험 번호/코드: GE0-703
시험 이름: Genesys (GCP7 - Consultant, Voice Enterprise Edition)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2014-03-05
GE0-703 덤프무료샘플다운로드하기: http://www.itexamdump.com/GE0-703.html
NO.1 Refer to the CTI Property tab in the Provisioning IVR profile section in the EMPS. The Default Route
Number is used when __________.
A. IVR Server is unable to contact the Solution Control Interface (SCI)
B. IVR Server is unable to contact the Universal Routing Server (URS), or when the URS is unable to
find an agent number to which it can route the call
C. IVR component, specifically Genesys Queue Adapter (GQA), cannot communicate with SCS.
D. IVR Server component cannot communicate with the Web Server
Answer: B
Genesys자격증 GE0-703 GE0-703 dump GE0-703기출문제 GE0-703 GE0-703
NO.2 The ability to record the caller's speech for application analysis is configured in an IVR Profile within
the EMPS and is referred to as __________.
A. OA&M
B. EMS Runtime
C. Enable ASR Transcoding
D. Enable ASR Logging
Answer: D
Genesys GE0-703 pdf GE0-703 GE0-703자격증 GE0-703
NO.3 The process on the VCS/IPCS that starts the other component processes is the __________.
A. Page Collector
B. IVR Server Client
C. Call Flow Assistant
D. WatchDog
Answer: D
Genesys GE0-703최신덤프 GE0-703 GE0-703 GE0-703
NO.4 When you make a change to a parameter, such as PopGateway, Route1, Route Type - from InBound
to OutBound, what needs to happen for this change to go into effect?
A. restart WatchDog
B. no need to restart anything. New parameter value goes into effect immediately
C. restart the EMPS
D. restart MRCP Server
Answer: A
Genesys자격증 GE0-703인증 GE0-703 GE0-703 dump GE0-703인증 GE0-703
NO.5 For most deployments with VCS configured in Behind-the-Switch mode using Genesys Framework,
DNIS is obtained through what mechanism?
A. VCS request to the T-Server via IVR Server
B. VCS requests to the Dialogic telephony board
C. a route point corresponding to the appropriate strategy
D. VCS request directly to the ACD/PBX
Answer: A
Genesys인증 GE0-703 GE0-703 GE0-703
NO.6 Under what circumstances is a username and password required to access the EMPS?
A. Never. By default, a username and password is not required since EMPS is only used for monitoring
purposes.
B. Always. When opening EMPS Login screen, the system will require users enter their username and
password.
C. Only when the EMPS is being accessed from a remote workstation. You are automatically
authenticated and can log in from a local machine.
D. Only when using SunOne Directory Server because OpenLDAP has no built-in security for the EMPS
login screen.
Answer: B
Genesys dump GE0-703 GE0-703 GE0-703 GE0-703
NO.7 The <Application_Name>.xml files provides all of the __________.
A. VCS configuration information
B. voice application information
C. IPCS configuration information
D. web server configuration information
Answer: B
Genesys GE0-703 dump GE0-703 GE0-703
NO.8 Which version of the VoiceXML Specification does GVP version 7.5 support?
A. VoiceXML 1.0
B. VoiceXML 1.1
C. VoiceXML 2.0
D. VoiceXML 3.0
Answer: C
Genesys기출문제 GE0-703 GE0-703 pdf GE0-703기출문제 GE0-703 dump GE0-703
NO.9 How are VoiceXML pages produced during a GVP call session?
A. Web application server generates VoiceXML when processing asp or jsp pages
B. VCS or IPCS produce VoiceXML when the call is initiated
C. EMPS produces VoiceXML when the request comes in
D. IPCS creates the VoiceXML when it relays SIP messages
Answer: A
Genesys GE0-703최신덤프 GE0-703 GE0-703덤프 GE0-703
NO.10 After WatchDog is started, GVP.ini file contains __________.
A. no configuration information for VCS/IPCS processes
B. application specific configuration information such as DNIS
C. the configuration information for VCS/IPCS processes, such as default log levels
D. only Dialogic configuration information
Answer: C
Genesys GE0-703 GE0-703 GE0-703
NO.11 The <DNIS>.XML and <Application_Name>.xml files are generated when __________.
A. a call arrives at the VCS
B. an application is created and configured in EMPS
C. the WatchDog on the EMPS is restarted
D. requested by the IVR Server
Answer: B
Genesys최신덤프 GE0-703 GE0-703 GE0-703자료 GE0-703자격증
NO.12 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys덤프 GE0-703덤프 GE0-703덤프
NO.13 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A
Genesys자격증 GE0-703 GE0-703 GE0-703
NO.14 Which GVP software component is used to configure the various components of GVP including
application provisioning?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: A
Genesys GE0-703 dump GE0-703덤프 GE0-703
NO.15 A logical group of ports is referred to as a __________.
A. Telephony Manager
B. Route
C. Page Collector
D. MRCP Client
Answer: B
Genesys GE0-703 GE0-703
NO.16 Where is the default location of the DNIS Application Mapping Files?
A. <install dir>\CN\data
B. <install dir>\CN\web\dispenser\spd_data
C. <install dir>\CN\config
D. http://EMPS:9810/spm
Answer: B
Genesys GE0-703 GE0-703 dump GE0-703
NO.17 In a Behind the Switch configuration, the VCS carries out instructions from __________.
A. IVR Server only, in the form of IVR ServerXML
B. T-Server only, in the form of TLib Events
C. Web Server, in the form of VoiceXML
D. IVR Server client, in the form of XML
Answer: C
Genesys GE0-703자료 GE0-703 GE0-703 dump
NO.18 The DNIS.xml provides __________.
A. the Primary Application URL
B. all application configuration information but no process information
C. the address of the IVR Server
D. the URL path to the <Application_Name>.XML
Answer: D
Genesys GE0-703 dumps GE0-703 GE0-703시험문제
NO.19 A Primary Voice Application URL is required when provisioning the IVR Profile. The Primary Voice
Application CANNOT include __________.
A. the fully qualified name of the web server that hosts the application
B. the numeric IP address of the web server that hosts the application
C. the name of the first page of the voice application
D. the path to the <Application Name>.XML file
Answer: D
Genesys덤프 GE0-703 GE0-703 GE0-703 GE0-703인증
NO.20 In an In-Front of the Switch configuration using Genesys Framework, __________.
A. the VCS receives all call routing information from the strategy
B. the DNIS must be delivered to the VCS with the call
C. a connection with the IVR Server is required
D. ANI is required to initiate or begin the call.
Answer: B
Genesys GE0-703 dump GE0-703
NO.21 Which GVP application is used to build and test voice applications?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: D
Genesys최신덤프 GE0-703 GE0-703 GE0-703
NO.22 The GVP VoiceXML application logic resides on __________.
A. a web server
B. the VCS
C. the VPM
D. the IPCM
Answer: A
Genesys자격증 GE0-703 GE0-703자격증
NO.23 In the <Application_Name>.xml file, the IVRTimeout value determines __________.
A. how long URS waits for the response from web server before timing out and trying default routing
target.
B. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Backup IVR URL.
C. how long GQA waits for the connection with the IVR Server before using the Backup IVR URL.
D. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Primary IVR URL.
Answer: B
Genesys GE0-703 GE0-703 dumps GE0-703 GE0-703
NO.24 When the parameter localconfig is set equal to 1 (localconfig = 1) in GVP.ini, the WatchDog service
will __________.
A. not read the local GVP.ini file, using the latest configuration contained in the LDAP database for the
VCS/IPCS parameter settings
B. read the local GVP.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
C. read the local watchdog.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
D. read the local EMPS.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
Answer: B
Genesys GE0-703 GE0-703기출문제
NO.25 The Voice Communication Server (VCS) processes __________ calls.
A. VoIP
B. IPCS
C. Web-based GUI
D. TDM
Answer: D
Genesys GE0-703자격증 GE0-703시험문제 GE0-703최신덤프
NO.26 Which of the following features can be changed using the Element Management System (EMS) GUI
when monitoring a VCS?
A. the log level for each process
B. the default directory for logging
C. the Behind or In-Front configuration for that particular VCS
D. the speech recognition vendor for that particular VCS
Answer: A
Genesys자료 GE0-703최신덤프 GE0-703 GE0-703
NO.27 When would you use the Import Server Instance CSV feature in EMPS?
A. Never. This feature is not available through the EMPS
B. Any time you want to make a change to any of the parameters in EMPS
C. You want to start the Watchdog service
D. When numerous changes are needed with servers or configuration of various components for a
server and in conjunction with Genesys Technical Support
Answer: D
Genesys pdf GE0-703 GE0-703기출문제 GE0-703기출문제
NO.28 Which of the following are Windows prerequisites for VCS?
A. there are no Windows prerequisites
B. Active Directory
C. IIS and SNMP
D. SQL Server
Answer: C
Genesys GE0-703 GE0-703 GE0-703 pdf GE0-703 pdf GE0-703 dump
NO.29 To bring up the 9810 listener window in EMPS you need to expand Server, CORE, click on
<ServerName> and then follow which links?
A. Right-click on the Server and view
B. Click link for Network Management GUI to open the 9810 listener
C. Click the link for Server Explorer to open the 9810 listener
D. There are no available links for the 9810 listener window in the EMPS.
Answer: B
Genesys GE0-703 pdf GE0-703 GE0-703
NO.30 Which VCS/IPCS component controls the TDM telephony or IP Telephony interfaces?
A. PopGateway
B. Page Collector
C. MRCP Client
D. Net Management
Answer: A
Genesys GE0-703 GE0-703 dump GE0-703 GE0-703기출문제
ITexamdump의 E20-891덤프의 VCE테스트프로그램과 642-997덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-410시험에 대비한 고품질 덤프와 640-916시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-060시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기